Description
Voltage: 110V Rated Power: 1500W (Note: Working power changes as the heating element size changes) Illumination: LED Light Heating time: Continues up to 6 minutes. (From normal temperature to protection switch-off temperature) Heating capacity reference: Heating 10 bolts from 25°Cto 300°C. Recommended Heating Temperature : 200-700°C. Bolt Diameter: Φ10-22mm, Φ23-28mm, Φ29-36mm, Φ37-40mm Functions: Heating rusted bolt nut, by the purpose of fast and easy remove from machines, cars etc. Using the thermal expansion theory, when the nuts of the bolt is heat, it expands which makes it easy to be removed from rusted bolt. If you need to use this device to others applications, please contact local dealer for support, any inappropriate operation may cause damage to the device. Operation Steps: 1.Release the 2 fixing bolts contraclockwise 0.5cm out. 2.Select appropriate size of coil for your work and insert the two ends into the front holes. 3.Twist the bolts clockwise to fix the coil tightly. Plug in and place the heating element in the center of the coil, then press & hold the red button, the light in front will illuminate in 2-3 seconds. At the same time, the heating elements' temperature raises, when work is done, release the button, and put it in safe storage. Use Rules: This device is built in the over heat protection, it will shut itself off to prevent damage from overheat, you can use it after the temperature drop to normal . Please try not to use it over 5 minutes one time, although the device is built in the over heat protection, however, life spam of the device may be reduced. During use, please place the coil in the center of bolt/heating object, try not to reach or close to large metal part where you don’t need to heat), otherwise the working load increases and slow down heating speed of bolt. Please refer to Pic 4. When the white coil insulation is breach, please replace with new insulation pipe, or replace the coil, if you have to use it, please not use it in the way of Pic 1, Pic 2. (Breach of insulation pipe may lead to short circuit of coil, thus may cause irreversible damage to the heater) Do not block the vent holes during working, otherwise cooling ability decreases, and cause overheat to the device very soon. Please don't put this device in fridge, near the air conditioner vent, this may cause condense water inside of the device and may damage the board. Please don’t bend the power cord sharply, no matter in using or storage. Please don’t open the device by yourself. Package includes: 1pc of Magnetic Heater 4pc of Coil 1pc of User Manual Payment Policy We accept PayPal ONLY currently. Payment must be made within 3 business days. Shipping Policy 1. Item will be shipped within 1-3 business days from US Stock according to the item location. 2. Sometimes the ship date will be delayed due to a shortage. We will inform you via message. 3. Please leave available address and phone # in delivery information. Seller are not responsible for wrong address. 4. Please indicate your personal requirement such as colors, packages, value of declaration etc. at PayPal's message when make payment. 5. We will NOT responsible for any delay during delivery including but not limited to customs postage checking, strike, force measure etc. Returns Policy Returns are accepted within 30 days. Please read the item description and check the pictures carefully before bidding. Return or refund is available only if item DOA or there's error in item description causing the item not fitting your need. In such cases, seller pays for all related shipping cost if any. Returns are also acceptable if buyer purchased this by mistake and item still in good condition for reselling. Buyer is responsible for all related shipping cost.
The seller's response was very friendly, so the service was very satisfactory. The price of the product was very low and the delivery fee was free, so I was very satisfied with the price. The quality of the product is very good. The design is also my favorite. This seller's store has a lot of things I like, so I'm going to buy them again next time. I hope you thrive more in the future^^
Nice quality grapher. Well, they only make a few models for us consumers and this is the higher end one. I got it today and tried it and adjusted a couple of automatic watches. Works great. No issues. Comes well protected in styrofoam in a box and it arrive quickly and safely. I recommend this seller and the timegrapher is a well known brand used world wide. Thanks.
The grille came as expected. High quality. Best price around that is unmatched by any company. The grille is as described and looks OEM. It came in brand new. I can’t wait to put it on my truck. Seller communicated well. A++++
Related products
Dorman 961-022D Trim Screw Assortment - Chrome - No.8
$ 6.04Dorman 44730 Screw
$ 6.34Dorman 760-107N Cap Screw-Hex Head-Grade 5- 5/16-18 x 3/4 In.
$ 12.14Dorman - Autograde P/N:44222
$ 5.27