Bluetooth Car OBD2 Diagnostic Scanner OBDII Auto Fault Code Reader Tool ELM327
$ 8.98
Description
ELM327 Bluetooth V1.5 Diagnostic devices OBD2 Scanner Tool Code Reader for Android Bluetooth Elm327, with real PIC18F25K80 Chip/firmware version V1.5/4MHz/understanding commands such as ATPPs and others. Please note: Please select the correct device according to your telephone system, Android or iOS. 1. Bluetooth Elm327 only supports the Android system. 2. WiFi Elm327 supports both the Android and the iOS system. If you have an iPhone, please buy WLAN ELM327. Features: * Firmware version V1.5 (supports more protocols SAE J1850 than V2.1). * With chip: PIC18F25K80, all Elm327 functions supports in program Elm327 ID ID for full functions. * It understands commands like ATPPs and others. * The frequency of the crystal ziller is 4 MHz. Main functions: With the proper software installed in the host device, you can read the following parameters from your vehicle: * Vehicle speed * Rotational speed * Fuel consumption * Engine coolant temperature * Fuel printing * Calculated motor load * Throttle valve position * Intake manifold pressure * Air intake temperature * Timing progress * Mass air flow * Tank level * Air pressure * Steam pressure of the system of the system * Mixture adaptation ... Note: Your vehicle may not support all parameters mentioned above. How many parameters you can get depends on the implementation of the vehicle manufacturer. Supported protocols: 1. Sae J1850 PWM (41.6 KBaud) 2. Sae J1850 VPW (10.4kbaud) 3. ISO9141-2 (5 Baud Init, 10.4kbaud) 4. ISO14230-4 KWP (5 Baud Init, 10.4 Kbaud) 5. ISO14230-4 KWP (Fast Init, 10.4 Kbaud) 6. ISO15765-4 CAN (11-bit ID, 500 Kbaud) 7. ISO15765-4 CAN (29-bit ID, 500 Kbaud) 8. ISO15765-4 CAN (11-bit ID, 250 Kbaud) 9. ISO15765-4 CAN (29-bit ID, 250 Kbaud) A. Sae J1939 Can (29bit ID, 250*Kbaud) B. User1 CAN (11*bit id, 125*Kbaud) C. User2 Can (11*bit id, 50*Kbaud) *Standard settings (user adjustable) This ELM327 can usually work with OBD 16pin Aadapter and 12 -V engine on most new autoen: For USA Car Brand after 1996; For the European car mark (gasoline) after 2001; For the European car mark (diesel) after 2004; For the Japan car mark after 2006; For the Korea car mark after 2010; For the Chinese car brand after 2009; For the Russian car brand after 2012; ... Supported cars: If your vehicle does not fall into one of the categories mentioned above, look under the bonnet and try to locate a label that expressly stated that the vehicle is designed for compliance with OBD-2 legislation. Hardware requirements: For Android/for iOS devices (for iPhone, iPad, e.g.)/for PC -Bluetooth Elm327 only supports the Android system, does not support iOS system. So if you have an iPhone, please buy WiFi Bluetooth Elm327. - WIFI ELM327 supports both the Android and the iOS system. Package list: 1 x ELM327 Bluetooth version OBD interface On Jul 23, 2024 at 01:33:25 PDT, seller added the following information:
