Smart Lighting Wireless Touch Switch 433MHz Remote Home Controler Relay Battery
$ 4.57
Description
Smart Lighting Wireless Touch Switch 433MHz Remote Home Controler Relay Battery Controller Parameters: Working Voltage: AC85-240V, 60Hz/50Hz Working Frequency: 433.92MHz Total Load Power: Less than 1000W Receiving Sensitivity: -108dBM Working Method: Wireless Remote Control Coding Method: Learning Code Modulation Method: ASK Working Temperature: -10°C to +70°C Size: 72 * 38 * 26 (mm) Memory Function: The controller features a memory function that retains the state before the power was turned off. This ensures that the previous settings are recalled upon power restoration. Note: This controller is designed for wireless remote control, operates on a frequency of 433.92MHz, and has a learning code for easy customization. It is suitable for various applications where remote control of devices or systems is required. Wireless Switch Parameters: Material: HD Tempered Glass Working Voltage: DC 3V Working Frequency: 433.92MHz Transmitting Power: <10mW Remote Control Distance: <100 meters (indoor distance) Working Method: Wireless Remote Control Coding Method: Learning Code Modulation Method: ASK Working Temperature: -10°C to +70°C Size: 86 * 86 * (mm) Battery: Standard Battery, CR2032 (Battery not included) Note: This wireless switch is equipped with HD tempered glass, operates on a frequency of 433.92MHz, and utilizes a learning code for easy customization. It is designed for wireless remote control applications, providing a remote control distance of less than 100 meters indoors. The standard battery used is CR2032 , but it is important to note that the battery is not included with the switch . Pairing Signal: Press and hold the controller for 3 seconds to enter the code matching mode (the code indicator light flashes 5 times). While in code matching mode, press the wireless switch 2 times and wait for 2 seconds. The code matching is successful, and the default status is set to always on. Clearing the Signal: Press and hold the controller for 10 seconds to initiate the code clearing process (the code indicator flashes 10 times). Note: These instructions describe the process for pairing the signal between the controller and the wireless switch, as well as clearing the existing signal. Follow the specified steps for successful operation. Before You Order It's easy to make mistakes when ordering, so please double-check the details. All the information you require should be on this page, however if you have questions not already answered here, please contact us . It's better to check than to discover a problem after the item have arrived! POSTAGE Please note that for some items in our store we not provide combined shipping! Time of arriving Approximately => 30 - 60 working days Package included 1x Controller or Smart Switch (according to your choice) Thanks for your attention!!!