Wi-Fi Add-On Board for Tibbo Serial-to-Ethernet Modules
$ 1.06
Description
GA1000 Wi-Fi Add-On Board for Tibbo Serial-to-Ethernet Modules GA1000 The GA1000 is an 802.11b/g add-on board for the EM1000 , EM1001 , EM1202 , EM1206 or EM500 BASIC-programmable embedded module . It can be fully controlled from within a Tibbo BASIC application. The GA1000 add-on board further expands the scope of potential EM1000 or EM1202 applications by adding Wi-Fi communications capability to the programmable module. The module utilizes SPI interace and only requires five I/O lines to control. Flexible mapping allows your application to use any five available I/O pins. Note: It is not possible to use the GA1000 as a standalone product. It works only as a slave device in combination with the EM1000, EM1001, EM1202, EM1206 or EM500. It also can be plugged into a Tibbo Project PCB . 802.11b/g Wireless Module Features Implements 802.11b and 802.11g wireless standards Compatible with all T1000-based modules (EM1000, EM1202, EM1206, EM500) Dimensions: 42 x 19 x 6.7 mm Chip antenna on board; coaxial connector (I-PEX MHF) for external antenna Requires only five I/O lines to control, and any five lines can be used On-board Status LED (red) for scan/link indication Power: 280mA (max) @ 3.3V LED indicator The GA1000 has a single red status LED: During scanning (wln.scan), the LED blinks When the GA1000 is associated with an access point (wln.associate), the LED is ON When the GA1000 is in ad-hoc mode and has another peer connected to it, the LED is ON as well In all other cases, the LED is off
